| Brand | Yato |
| Entity responsible for this product in the EU | TOYA S.A.More |
| Series | GRF |
| Required air flow | 350-400 l/min |
| Recommended working pressure | 0.4-0.8 MPa |
| Max. working pressure | 0.8 MPa |
| volume | 50 m²/h |
| Tank capacity | 4.75 l |
| Dimensions | 860x220x220 mm |
| Outlet nozzle quantity | 4 |
| Nozzle diameter | 17.5 mm |
| Air supply hose inside diameter | 10-14 mm |
| Length of handle | 600 mm |
| Air connection diameter (PT) | standard |
| Max. sand grains diameter | 6 mm |
| Acoustic pressure | 93.6 ± 2.5 dB(A) |
| Acoustic power | 104.6 ± 2.5 dB(A) |
| Vibrations | 2.5 m/s² |
| Weight | 2 kg |
| Symbol | YT-54400 |
Pneumatic plaster made of stainless steel and quality plastic sheet with a brass valve and air connections. Designed for quick and effective spray plastering by a majority of typical plasters and masonry mortars. The use of plastering allows for a significant acceleration of plastering while increasing its quality. Equipped with a large convenient handle to facilitate maneuvering the device. The useor is required for the work of the plaster. The capacity of the tank is about 4.75l, the number of exhaust nozzles-4 average efficiency-ok 50 m²/1 hour when working one person weight of the device 2.1 kg required air pressure 4-5 bar required compressor performance 350 l/min for fast and quick and effective spray plastering by a majority of typical plasters. Requires a compressor connection. Connect the device with a pneumatic cable to the compressor, apply the right amount of mortar/ plaster to the tank, direct holes towards the plastered wall, open the intake valve, spray evenly depending on the needs. After finishing work, dip the plaster tank in water and rinse. Plaster. Does not contain a cable and compressor.
Usage warnings:
Warning! Always use personal safety equipment at work.
Always keep the plasterer close to the wall when working.
The distance of the nozzles from the wall should be 5-10 cm.
